Scheme for improving the grinding efficiency of Graphite Minerals Pulverizer Machine
For the production process of Graphite Minerals Pulverizer Machine, only the high grinding efficiency of the system can increase the profit of the equipment, and its efficiency will be affected by many factors, such as the nature of the material, such as the condition of the equipment. And, for example, process parameters, etc., only the comprehensive improvement of these aspects can improve its production efficiency. Here is a detailed analysis of these aspects.
The first is the analysis of the nature of the material, which mainly includes the granularity of the material added to the inside of the Graphite Minerals Pulverizer Machine, the fineness of the finished product, the grindability, the water content and the temperature. One-to-one analysis:
First, the particle size of the material and the fineness of the finished product
For the Graphite Minerals Pulverizer Machine, during the production process, when the feed size is too large, the grinding action of the equipment cannot be adapted, increasing the load and wear of the equipment, and the same fineness of the finished product. At the time, the processing time will be longer, so the efficiency will decrease. Similarly, if the grain size of the material is reasonable, the fineness of the finished product at the time of work will cause the output to drop.
Second, the material is easy to grind
For the production process of Graphite Minerals Pulverizer Machine, the wearability is an important reason that affects the efficiency. Generally speaking, the wearability is high, so the production difficulty is small, and the efficiency of the equipment is relatively high. Inefficient, in order to achieve good efficiency, it is very important to control the wearability of the feed;
Three, moisture of materials
The effect of this phenomenon on the Graphite Minerals Pulverizer Machine, mainly if the water is high, will make the abrasive stick to the lining, and even the phenomenon of full grinding will occur. If the material contains more than 5% moisture, then the mobile crushing The machine will not operate normally. According to practical experience, if the moisture in the material is increased by 1%, the output of the Graphite Minerals Pulverizer Machine will drop by about 8%, so reasonable control of the moisture of the feed is to improve the efficiency of the equipment. An important aspect;
Fourth, the temperature of the feed
For the production process of Graphite Minerals Pulverizer Machine, the temperature of the feed is also a major factor affecting the output. Generally speaking, if the internal temperature of the mill is high, the grinding efficiency of the equipment will be reduced, so for the machine The control of the feed temperature is also very important, and the appropriate temperature is an important condition for obtaining high yield;